Perfect First Layer Podcast

This Episodes Questions

Is 3D modeling the right path for me? Hey guys, I really look forward to your podcasts!  I have been listening since the very early days finding you via Guy’s work with woodworking.  Yet, I have not bought a printer.   I am a 72 year old retired Chemical Engineer that made chemicals and plastics but nothing from plastics.    I have come to realize that as much as I enjoy polymer chemistry and  learning new t...

This Episodes Question:

Hi all,  I have recently build my first voron . Hell yeah .It's a 2.4 Ldo motors edition. But now Iam ready with that i where thinking aboud thé next step . I'am thinking aboud a mmu system for it . I have seen thé trad rack and thé box turtle . But i heard the box turtle is more popular than thé trad rack . Co pilot gives me thé intention thé trad rack is cheaper but has also a bit more faults in it than th...

This Episodes Questions:

Hey this is Brody just sold my ender 3 and am going to be buying a p1s. Just wondering because the x1 x one of the P1s are 2 years old now, if they’re still valuable option in 2025 or are they just outdated over priced junk?

Hey guys, I recently bought a 0.6mm nozzle for my Ender 3 V3 KE. Sadly neither Orca or Creality Print come with a profile other than 0.4 for my printer. How do you tune a profile for a ...

I bought a P1S for my daughter (5) and I to have a hobby together. Well, now... now I "need" a big printer (350 cubed, or bigger). It would be just for PLA and maybe PETG... more fun prints/decorations. Any recommendations? I'm looking for reliable, solid quality, and cheaper ($300-400 preferably.  I'm fine with the secondary market)... "quiet" would be a huge bonus. I'm not really concerned with speed. On the flip side of that... ...

This Episodes Questions:

I want to print a TPU base for my Stanley so it doesn’t clang and scratch my glass top tables. I was wondering what is the best glue to use which would work best and hold up in the dishwasher. I have some beaver contact cement laying around and am wondering if that would work. I wanna hear Guys full nerd answer :) Jeff

I keep hearing conflicting augments about wear from abrasives filaments. I run all diamon...

This Episodes Questions:

As a frequent listener to your podcast, I am curious as to why you do not discuss PETG and ASA filaments more often.  There is no longer a cost premium for PETG and ASA is only marginally more expensive.  Both materials have superior physical qualities for use with functional parts, both indoors  and outdoors. I started with a FlashForge Adventurer 4 three years ago and upgraded to a Bambu X1C two years ago...

This Episodes Questions:

Rosemarie Hi, I enjoy listening to your podcast! I have four Bambu Lab printers, each with its own issue as to why the printer is not working. There are connectors with corresponding pins which constantly fail when having to pull out the pin to clear a clog, change a nozzle, or install a replacement part. I align the pin properly within the connector BUT it doesn't 'catch'. How do I remedy this issue apart ...

This Episodes Questions:

Hello to a fellow Hoosier and the J's, I have almost bought a printer for at least 15 years, almost bought a makerbot, almost bought a RepRap, but always got discouraged at their difficulty to use. I put purchasing one on the back burner. In December 2024 I purchased a Bambu P1S. This printer is great and just works. But, it's boring. I need to tinker. I'm just a hobbyist at this point. I can see making and...

This Episodes Questions:

I picked up a cheap elegoo Neptune 4 pro on sale so I would have a fast way to kick out some PLA chotchkes for the kids. It was pretty fast and good, until some screws came loose on the hot end, and I while I was realigning the hotend and re-fastening the screws, something happened that caused the heater to go into runaway heating. Basically what I think happened is I wiggled the heater cartridge wires and ...

This Episodes Questions:

I have a CR-10 Smart that is on the verge of becoming scrap metal.  The hot end clogged so bad I could not even get the filament out of it.  I replaced it with a hotend from a cr-6se, because it is compatible, and have not had any luck despite my constant tinkering, PID tunes, re-leveling, etc.  Is there any other options for me and this printer? Would it be possible to turn it into a big ender with a diffe...

This Episodes Questions:

I want to put a touch screen on my ender 2 pro without any knob on like I have on my ender cr-6se and was wondering if you know if I get a cr-6 one would it be plug and play? Is there a community firmware for the ender 2 pro? Thanks, William

I am looking at buying a new printer for myself as a Christmas present and right now there's two big questions in my mind. One is the Qidi plus 4. Seems like everything...

This Episodes Questions:

I recently purchased a Elegoo Neptune 4 Max to print large things.  It came with a 0.4mm nozzle for some reason.  My plan was to replace it with a 0.6mm or 0.8mm nozzle.  As a test I kept the 0.4mm on.  I scaled the object in Orca slicer and chose standard 0.2mm layer height.  Orca said it would take 7 days to print.  I added a second Elegoo Neptune 4 Max printer in Orca Slicer but this one with 0.6mm nozzl...

This Episodes Questions:

Hey guys! Long time listener, first time caller! I recently took home an old(ish) Fusion3 F410. (Our department at work wanted to get rid of it.) We also have a Raise3d Pro3, BambuLab X1C and X1E, so this thing is a real pain to use in comparison. About the only good thing it has going for it is the big build volume (355x355x315), other than that there are a couple of annoyances: - Glass build plate - Auto ...