Lipps Electric Podcast

🎙️ “Are AC and Lights on the Same Circuit? Here’s Why That’s a Problem!”

This episode explains why an air conditioner and lights should not share the same circuit and how that can cause issues.

It describes how breakers in a panel alternate between two legs (odd slots on one leg, even slots on the other), creating the split 120/240V arrangement that determines which loads share a leg.

As a practical fix, the host suggests checking...

Why Your Lights Dim When the AC Kicks On?

On this episode Kevin Lipps of Lipps Electric and Jim Klauck from Check A Pro explain why lights can dim when an air conditioner starts — a large startup (inrush) current can briefly drop voltage, usually causing a short, mild dim. They discuss when dimming is normal and when it may indicate a deeper electrical issue.

Topics include shared circuits, loose or corroded wiring, aging panels an...

🎙️ “Is Your Home a Wiring Time Bomb? What to Check If Your House Is 30+ Years Old.”

If your home is older than 30 years, have the electrical system inspected — and if it hasn’t been rewired, consider doing so. Homes built before the 1980s may still have aluminum wiring, which can be a safety concern.

Even older houses (mid-20th century and earlier) might have knob-and-tube wiring, so get a professional check to determine whether u...

When Aluminum Wiring Goes Wrong: What could happen?

Aluminum wiring was once installed in many homes but later proved to be a mistake when used inside walls. The main problem is that aluminum used for outlets and switches can overheat, creating a fire risk.

By contrast, aluminum utility and service entrance wiring is designed for that purpose and is generally safe. The danger lies specifically with older aluminum conductors running...

⚠️ Is Your Home Wiring a Fire Hazard? Why Aluminum Wiring Is Dangerous!

Question, do I need to upgrade my wiring? If your home is older than 30 years, have the wiring inspected — aluminum wiring is a known fire risk.

Aluminum expands and contracts, loosens screw connections, and can cause sparking, melting, and potentially fires. I do not recommend keeping any aluminum wiring.

At minimum, rewire the basement and attic; consider a f...

🎙️ “Is My Electrical Panel  Up To Code and Safe? Signs Every Homeowner Should Know.”

Check A Pro Joe talks with Kevin Lipps of Lipps Electric about how older electrical panels may not meet modern safety codes and what homeowners should watch for.

They discuss red flags like Federal Pacific or stab-lock panels, rusted or damaged wiring, overhead service connections, and frequent tripping breakers — plus the importance of having a l...

Why Do My Lights Dim When the AC Kicks On?

When your air conditioner kicks on, the compressor draws a large surge of power called inrush current, creating a brief voltage drop that can make lights dim.

This dimming is typically a short-lived nuisance rather than a safety hazard, since it results from the normal startup load of the A/C.

🎧 Listen For The Full Episode of the Podcast -

🎙️ Podcast Episode: Why Do My Lights Dim When My A/C Turns On?

Join Jim and Kevin as they delve into a common household concern: why do lights dim when the air conditioner turns on? This episode of Check A Pro Radio explores the causes of voltage drops and the intricacies of electrical systems in homes, especially older ones. Kevin shares his expertise on diagnosing and resolving these issues, providing practical solutions ranging...

🎙️ Podcast Episode: What Are The Signs Of A Potential Electrical Fire Hazard?

In this important episode of the Check A Pro Radio Show, host Jim Klauck explores the warning signs that your home’s electrical system might be a fire waiting to happen. From burning smells and flickering lights to tripped breakers and discolored outlets — we break down what every homeowner should watch out for to keep their family and property safe.

Joi...

WHAT COULD BE TRIPPING MY CIRCUIT BREAKERS?

In this episode, we delve into a common household concern—tripping electrical breakers. Joined by Kevin Lips from Lips Electric, we explore why breakers trip and how to prevent potential hazards. Kevin shares expert insights on avoiding overloaded circuits, understanding short circuits and ground faults, and the dangers of improper breaker replacement. From recognizing signs of electrical...

Most homes today rely heavily on electricity, making electrical safety a crucial yet often overlooked aspect of home maintenance. In this informative episode, electrical expert Kevin Lipps highlights the alarming risks associated with faulty electrical outlets, including electric shocks, circuit overloads, and fire hazards. With over 28,000 electrical fires reported annually, ensuring your home's electrical system is up to code and...

Join us as we explore the impactful transformation of Lipps Electric after their recent rebranding. Discover how this bold move has set them apart from competitors and energized both their team and customer interactions. In this episode, Kevin shares insights into the thought process behind rebranding, its significance in the marketplace, and the positive changes it has brought to their business environment.

By upgrading their imag...

In this episode, join us for an insightful conversation with Kevin Lipps from Lipps Electric. Discover the driving force behind Lipps Electric's mission to serve the local community by providing safe and customized electrical solutions. Kevin shares the company's commitment to fostering employee growth and maintaining high standards without necessarily becoming the biggest, ensuring that both clients and team members thrive.

Explor...